Calling with SIP

How to Use VIPKall with your SIP device

You can use VIPKall with the following types of Sip devices:

	SIP ATA (Analogue Telephone Adapter)
	SIP Router
	xDSL Modem

The most devices are equipped with a combination of the following ports.

Example 1

(this is merely an example layout, every type of device can be different)

Example 2

(this is merely an example layout, every type of device can be different)

	(A)DSL: connect your line from your (A)DSL provider (not available on a ATA)
	WAN: connect your line from your xDSL modem/router
	LAN: port for your (home) network, you can connect e.g. your PC, lap-top, network-printer or wireless router
	PHONE: here you can connect your analogue telephone
	LINE: connect your analogue (PSTN) telephone line
	USB: you can connect PC or lap-top with a free USB port

Some SIP devices have more than one LAN port and/or PHONE port available.

For the hardware connections from your SIP device look at the above information and your user manual. After connecting the hardware you have to make sure that your software is installed and configured the right way.

Software configuration

General
	SIP port : 5060
	Registrar : either sip.vipkall.com or the IP: 77.72.174.129
	Proxy server : either sip.vipkall.com or the IP: 77.72.174.129
	Outbound proxy server : leave empty
	Account name : your VIPKall username
	Password : your VIPKall password
	Display name/number : your VIPKall username or voipnumber
	Stunserver (option) : stun.vipkall.com

Codecs
	G.711 (64 kbps)
	G.726 (32 kbps)
	G.729 (8 kbps)
	G.723 (5.3 & 6.3 kbps)
	GSMFR (13.2 kbps)

Important notice:

Some Sip devices will not accept the symbol "@" in the username.
In that case you can use the symbol "*" instead.
For ex: customer1@reseller will become customer1*reseller

This will allow you to register on the sip device.